Home | About | Contact | Login 1 800 544-2488
     
 

PANEL SYSTEMS aluminum column coverscolumn covers CLICK ON THUMBNAILS FOR LARGER VIEW

laminate foam panels
 
  Laminated foam panels aluminum column covers

AlumaFab's Laminated Foam Panels are laminated on vacuum tables to insure bond with adhesives and superior flatness of our panel system.  Our foam panels use pre-cured rigid insulation boards cut from buns and allowed to fully cure before cutting into slabs and laminated into panels.  This system offers an excellent means of obtaining custom insulated spandrel panels.  Typically fabricated at a thickness of 1", the product is also available up to a thickness of 6", offering a maximum R value of 30.  

Glazed-in panels can also be designed with this system to install into;
 
  • Storefront systems
  • Curtain-wall glazing systems 
  • Entrance systems
 laminated honeycomb
 
 
 
We also fabricate Column Covers see our column cover page for further information regarding our column covers products.
  Face and Liner Materials Laminated Foam Panels Systems
 
  • Aluminum .040 Aluminum Face and Liners typical. .050, .063, .080, .090, & .125 are available.
  • Stainless Steel 22 Ga. Faces with compatible liners typical.  Polished or Brushed.
  • Galvanized Steel 22 Ga. Face and Liners typical. 20 Ga., 18 Ga., and 16 Ga. are Available
 laminated foam panels
 
 
  Cores
 
  • Polyisocyanurate cores (R-value of approximately 5 per inch of thickness)
  • EPS Expanded Polystyrene (R-value of approximately 5 per inch of thickness)
  • Hardboard backers are also available to increase durability in traffic areas
  Panels Size limitations
 
  • Maximum panel lengths Approx. 24'-0"
  • Maximum panel width Approx. 58" based on 1" panel thickness (varies with panel thickness)
     
  Finishes Available               
Spray Coated Products - Aluminum Panels Systems can be Painted with Kynar 500 Spray Coating System carrying up to a ten (10) year warranty available.
 
Coil Coated Products - Aluminum Panels System & Galvanized Panel System can be Painted with Kynar 500 Coil Coating System carrying a twenty (20) year warranty available.
 
Anodized Finishes are also available:  Batch anodizing process for fabricated aluminum products are produced with 5005 anodizable quality aluminum.
 
Coil anodized process available on aluminum fabricated products manufactured with light gauge sheet material 5005 anodizable quality aluminum.
 
Stainless Steel is available in several standard finishes #4 Brushed & #8 Polished in a Type 304 or Type 316. 
         Textured Stainless Steel and Specialty finishes are available in addition to our standard finishes
 
 
column covers Project Gallery

column covers Design Assistance

 
 
 
     

Download CAD Files column covers

Visit our Technical Resources page to view our specifications and CAD files available for our product line. To access and download our CAD (dwg) files, we invite you to register with our online system.


Products

GET A QUOTE

To request pricing for our products please visit our contact page for all of our contact information.  Looking for the information we would required too provide a quotation?  Please visit our FAQ section for a listing of this information required for quotations on our various products.

 

    • AlumaFab Metal Sales, LLC | 11901 Riverwood Drive | Burnsville, MN 55337
      Phone: (952) 895-5700 | Fax: (952) 895-1500 | 1-800 544-2488 | Email

    Copyright © 2004-2016 AlumaFab . All Rights Reserved

    Site created by Internet Consultants